Key Digital KD-X222PO 4K POH/HDBaseT/HDMI Extenders (TX/RX KIT)


Key DigitalAVAD SKU: 132726 MPN: KD-X222PO

Stock:
Check Availability

The HDBaseT 4K HDMI Extender Set from Key-Digital is an HDCP 2.2 compliant product that extend 4K/UHD 24/25/30 (4:4:4) and 4K/UHD 60 (4:2:0) signals up to 150 using a KD-CAT6STP1X Super Cat 6a shielded cable, or up to 125 using a single third-party Cat 5e/6 cable. 1080p/60, 1920 x 1200, 3D signals are extended up to 250 via a single KD-CAT6STP1X Super Cat 6a shielded cable, or up to 230 using a single third-party Cat 5e/6 cable. In addition to HDMI video and audio signals, this extender set carries IR or RS-232 for controlling remotely located equipment. This unit features power extension from the transmitter to the receiver with Power over HDBaseT, so the receiver unit does not require a power supply.

Features:

  • HDBaseT via Single CAT5e/6 UTP/STP Extension: With fully automatic adjustment of feedback, equalization, and amplification depending on cabling length
  • KD-X222PO: Features power extension from Tx to Rx with Power Over HDBaseT, Rx unit does not require power supply
  • Signal Extension:
    • Up to 150 ft. @ 4K 24/25/30(4:4:4)/60(4:2:0) using KD-CAT6STP1X cabling
    • Up to 125 ft. @ 4K 24/25/30(4:4:4)/60(4:2:0) using third-party CAT5e/6UTP/STP cabling
    • Up to 250 ft. @ 1080p /1920x1200 using KD-CAT6STP1X cabling
    • Up to 230 ft. @ 1080p /1920x1200 using third-party CAT5e/6 cabling
  • HDCP 2.2: Compliancy up to HDCP 2.2 and backward compliant
  • HDR (High Dynamic Range): More life-like images through a greater range of luminance levels
  • 4K/UHD Resolution: Supports signals up to 4096x2160 60Hz [4:2:0] 8bit, 4096x2160 30Hz [4:2:2] 12bit, and 4096x2160 30Hz [4:4:4] 8bit
  • Deep Color Support: Up to UHD/4K 30Hz 4:2:2/12 bits or 60Hz 4:2:0/8 bit
  • 3D: Support for standard 3D stereoscopic signal formats
  • Low Profile: Super slim chassis design
  • HDMI® and HDCP Licensing: Fully licensed and compatible with HDCP 2.2 and HDMI latest technology such as 4K/UHD 4:2:0/8bit at 60f/s
  • EDID Control: Internal library features 15 default EDID configurations and native EDID data from Output/Display devices connected via Rx
  • Hot Plug Detection Control: Enables integrator to choose if active signal voltage is forced to connected input devices
  • Full Buffer System™: Manages TMDS re-clocking / signal re-generation, HDCP authentication with source & display, EDID Control handshake, and Hot Plug control
  • IR Sensor: Sensor powering via +5V on Rx unit’s IR In port collects line-of-sight IR from remote(s) without external IR connecting block
  • Up/Down IR: Two channels of IR enable control to/from devices connected to Tx and Rx units
  • RS-232: Bi-Directional control to/from Tx and Rx unit on Phoenix connector
  • Rotary Switch RS-232 Control Mode: Provides control of Tx unit as well as connectivity status
  • Lossless compressed digital audio: Support for Dolby® TrueHD, Dolby® Digital Plus, Dolby Atmos®, and DTS-HD Master Audio™
  • CEC Support: For inter-device control between input and output HDMI channel
  • I2C Communication: EDID and HDCP authentication to Display and Source
  • Control System Support: Fully controllable by all RS-232 supported control systems via open API: Compass Control®, AMX®, Crestron®, KNX®, RTI®, Savant, URC®, Leviton® etc.
Technical: Inputs Tx (Each): 1 HDMI, 1 IR In Outputs Tx (Each): 1 CAT5e/6 UTP/STP, 1 IR Out /RS-232 Bi-Directional Inputs Rx (Each): 1 CAT5e/6 UTP/STP, 1 IR In Outputs Rx (Each): 1 HDMI, 1 IR Out /RS-232 Bi-Directional DDC Signal (Data): Input DDC Signal: 5 Volts p-p (TTL) HDMI Video/Audio Signal: Input Video Signal: 1.2 Volts p-p HDMI Connector: Type A, 19 Pin Female RJ45 Connector: Shielded Link Connector, HDBaseT IR In Connector: Phoenix Connectors IR Out (RS-232) Connector: Phoenix Connectors General: Regulation: CE, RoHS, WEEE Enclosure: Black Metal Product (Each): 4.1” x 2.8” x 0.875”, Weight: 0.75 lbs KD-X222 Power: (2) KD-PS5V2ASC, 5V/2A, 100-240VAC, 50-60Hz, Interchangeable head with screw-in connector KD-X222PO Power (Tx Only): KD-PS12V2ASC, 12V/2A, 100-240VAC, 50-60Hz, Interchangeable head with screw-in connecto
  • 12V 2A DC Power Supply  (Screw-In Type) (qty 2)
  • Mounting Brackets  (qty 2)
  • IR Emitter (qty 1)
  • IR Sensor (qty 1)
  • KD-X222PO only requires power on the Tx unit, which extends power to the Rx unit



Payment & Security

American Express Apple Pay Google Pay Mastercard PayPal Shop Pay Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.



You may also like

Recently viewed